Screw Conveyor with Loading Hopper
The screw conveyors in this version are designed for grain transport through direct loading into the hopper mounted at the lower part of the conveyor.
These conveyors are used in agriculture, warehouses, feed production facilities, and by livestock breeders.
The conveyor is an excellent solution for unloading grain directly from a trailer. The throughput can be continuously adjusted using a tubular shutter.
The conveyor features a low-positioned bottom drive, which enhances stability without putting stress on the tubular segments.
The discharge height is manually adjustable using a crank, with a gear ratio designed for easy and safe lifting and lowering of the conveyor.
The chassis is made of solid steel profiles, which improve stability and minimize the impact of vibrations caused by the rotating screw on the entire device.
Focusing on durability and user safety, we have not forgotten about the mobility of the conveyor. It is equipped with large-diameter front wheels and a set of rear swivel wheels for easy manual movement around the farm.
Gallery
Key Features of the Conveyor:
- High transport capacity – up to 50 t/h
- Operation under variable angles, with convenient adjustment using a winch
- Modular design, with lengths ranging from 4 to 12 meters, depending on the use of 1 m or 2 m extension segments
- Increased durability of working components and quiet operation – bearings and grease fittings* in each segment
- Adapted for outdoor use – hot-dip galvanized with a thick protective coating
- Large wheels suitable for all types of terrain
- Adapted for loading grain silos through an opening in the top cover
- Low purchase and operating costs compared to other transport devices, especially pneumatic conveyors
* For conveyors with a 150 mm diameter, grease fittings are not used in the slide bushings. Due to low transverse loads and the use of high-quality special sliding materials, their durability lasts for many years.
Technical Specifications
| CONVEYOR SYMBOL | TUBE DIAMETER (mm) | CAPACITY (t/h) | MOTOR POWER (kW) | MIN. LENGTH. (m) | MAX. LENGTH(m) |
|---|---|---|---|---|---|
| 150/6-9/OC-D | 150 | 15 | 3 | 6 | 9 |
| 150/10-12/OC-D | 150 | 15 | 4 | 10 | 12 |
| 200/6-9/OC-D | 200 | 30 | 5,5 | 6 | 9 |
| 200/10-12/OC-D | 200 | 30 | 7,5 | 10 | 12 |
| 200/12-14/OC-D | 200 | 30 | 9 | 12 | 14 |
| 250/6-9/OC-D | 250 | 50 | 7,5 | 6 | 9 |
| 250/10-12/OC-D | 250 | 50 | 11 | 10 | 12 |
| 250/12-14/OC-D | 250 | 50 | 11 | 12 | 14 |
When ordering, please refer to the conveyor symbol, e.g., 250/10-12/OC – D, where:
- 250 indicates the tube diameter in mm,
- 10 is the minimum conveyor length in meters,
- 12 is the maximum working length (achieved by purchasing an additional extension segment),
- OC means the conveyor is hot-dip galvanized,
- D indicates a bottom-drive conveyor with material intake through the loading hopper.
Extension Segments
| SEGMENT SYMBOL | NOMINAL LENGTH (m) | TUBE DIAMETER (mm) | COATING |
|---|---|---|---|
| 150/1/OC | 2 | 150 | Galvanized |
| 150/2/OC | 2 | 150 | Galvanized |
| 200/1/OC | 1 | 200 | Galvanized |
| 200/2/OC | 2 | 200 | Galvanized |
| 250/1/OC | 1 | 250 | Galvanized |
| 250/2/OC | 2 | 250 | Galvanized |
When ordering, please refer to the segment symbol, e.g., 250/2/OC, where:
- 250 indicates the tube diameter in mm,
- 2 is the segment length in meters,
- OC means the segment is hot-dip galvanized.
Additional Equipment
Extension Segment
Rotating Discharge Chute
Hopper Cover
We are at your disposal, providing advice on selecting the right conveyor as well as after-sales support, including technical assistance and full access to spare parts. Our company has a complete organizational structure, including a design department equipped with professional 3D design software, allowing us to quickly adapt our products to your requirements.
